Parodia rudibuenekeri is a striking succulent that gifts you with small, clustering offsets. In the summertime, you’ll be welcoming warmer temperatures with small flowers that range in color from pale to bright yellow and white.

Parodia is a genus of flowering plants that are cacti and which are commonly found in Brazil, Argentina, Paraguay, Colombia, Bolivia, and Peru. It’s a member of the Cactaceae family.

Rudibuenekeri is a small barrel cactus that doesn’t grow more than 8-inches (20.32cm) in height and 2-inches (5.08cm) in width.

Similar to other species, this cactus is covered in long, erect, and white-colored soft spines that give the succulent a fuzzy and glassy appearance. The spines are actually soft to the touch.

Its stem has a cylindrical shape that when fully grown can reach 7-inches (20cm) in height and 1.96-inches (5cm) in width.

General Information

Also known as: Rubibuenekeri.
Plant Family: Cactaceae
Origin: Brazil, Argentina, Paraguay, Colombia, Bolivia, and Peru
Height: 8-inches (20.32cm)
Exposure: 6 hours to partial to full sun per day.
Water Needs: Drought-tolerant; use the “Soak and Dry” method for watering
Soil Type: Cactus soil or 2 parts potting soil mixed with 1 part perlite, pumice, coarse sand, and lava rock for improved drainage.
Soil pH: 5.0 to 6.5

How to Grow and Care for Parodia Rubibuenekeri

Parodia Rubibuenekeri is popularly displayed in outdoor gardens to add more height and texture. However, you can also grow it indoors as a houseplant. This is advisable if you live in a zone where the temperature can go lower than 30° F (-1.1° C) because Rubibuenekeri isn’t a cold-hardy succulent.

Whether you decide to plant Parodia Rubibuenekeri outdoors or indoors, you won’t have any problems growing and caring for it.

Sunlight

The best location for Parodia Rubibuenekeri in an outdoor garden is an area where it can be assured of getting full to partial sunlight for up to 6 hours every day. Full sunlight is recommended as long as it’s from the morning sun.

Avoid exposing Rubibuenekeri to the afternoon sun because its rays can be intense enough to burn the succulent.

Inside your home, look for a window that brings in up to 6 hours of sunlight. Getting enough sun might be a challenge during wintertime. The best solution would be to place Parodia Rubibuenekeri under a Grow Light.

Watering

Like a cactus, Parodia Rubibuenekeri stores plenty of water. It can survive harsh drought conditions and thrive without water for weeks.

If you try to grow Parodia Rubibuenekeri like a typical plant and water it every day, you will fast-track its demise.

Since succulent plants store water, you don’t have to water them frequently. Doing so will keep its soil in a moistened state for a long time and expose the roots to a greater risk of rotting. In addition, wet soil becomes the ideal breeding ground for bacteria and fungi.

The simple rule when it comes to watering succulent plants is to water only when the soil is 100% dry. This is called the “Soak and Dry” method.

Check the soil’s dryness by inserting your finger or a stick an inch deep. If the soil or the end of the stick feels dry, prepare to give the soil a good soaking. Yes, water the soil and never the plant directly.

During the growing season of spring or summer, you might be watering Rubibuenekeri every 10 days. Expect the watering schedule to be less frequent – maybe only once a month – during winter.

Pot and Soil

Choose unglazed ceramic or terracotta as the type of pot for Parodia Rubibuenekeri. These types of pots are highly absorbent of moisture and will help dry out the soil faster.

Anticipate the growth of your succulent plant and buy a pot that’s slightly larger than its base to allow the roots to grow freely and provide better soil aeration.

The last thing you have to look for in a pot for Rubibuenekeri is that it must have a drain hole at the bottom so that excess water can drip out from the soil.

You can plant Rubibuenekeri in cactus soil or create your own by mixing 2 parts of potting soil with 1 part of gritty materials. Among the best gritty materials to use are perlite, pumice, coarse sand, and lava rocks.

How to Propagate Parodia Rubibuenekeri

Parodia Rubibuenekeri produces offsets that grow on its stems and can be used for propagation. However, you can also propagate the species through stem cuttings and leaves.

Offsets Method

Step 1: Use a sharpened and sterilized knife to cut off the offsets from the stem. Choose offsets that are large or mature and make sure the roots remain intact.

Step 2: Allow the offsets to form calluses over a period of 2 to 4 days.

Step 3: Plant the offsets in well-draining soil.

Step 4: Lightly water the soil and place the pot near a window that gets up to 6 hours of partial sunlight.

Step 5: Check the roots. If the roots have taken firm hold in the soil, water the soil only when it’s gone completely dry.

Stem Cuttings Method

Step 1: Cut a small section of the stem with a sterilized knife.

Step 2: Let the cuttings develop hard calluses. This will take 2 to 4 days.

Step 3: Place the cuttings on well-draining soil.

Step 4: Water the soil a bit to keep it moist then position the pot in an area that receives up to 6 hours of partial sunlight per day.

Step 5: If the root system has formed, switch to the “Soak and Dry” method of watering.

Leaves Method

Step 1: Perform a clean twist and pull to remove a leaf from the stem. Make sure no part of the leaf remains on the stem to ensure successful propagation.

Step 2: Place the leaves in a dry area where they can grow calluses over 2 to 4 days.

Step 3: Place the calloused leaves on top of well-draining soil.

Step 4: Spray the soil with water to keep it moist. Move the pot to an area that regularly gets 6 hours of sun.

Step 5: If the roots are present, water the soil when it’s 100% dry.

Frequently Asked Questions

The post Parodia Rubibuenekeri appeared first on About Succulents.

Opuntia macrocentra is a captivating cactus that will easily stand out and brighten your outdoor garden. Before it grows tall, this ground-hugging shrub will first spread out wide and adorn your succulent display with its alluring prickly, green pads that have purple stems.

The word “macrocentra” means long spines and these are very visible on the pads that change color from green to purple when given proper sunlight. In wintertime, the entire plant might turn completely purple.

Opuntia macrocentra goes by a variety of aliases such as “Purple Prickly Pear”, “Long-spined Prickly Pear”, and “Black-spined Prickly Pear”. The spines that sit atop pads with red-colored margins are what distinguish macrocentra from similar species.

When fully matured, Purple Prickly Pear can reach a height of 1.9-feet (60cm) to 3.9-feet (120cm) and spread out as far as 9-feet (3m).

Long-spined Prickly Pear will produce yellow-colored flowers in the springtime. These flowers are small; 1.96-inches (5 cm) to 3.93-inches (10cm) long with a width of 2.36-inches (6cm) to 2.75-inches (7cm).

Unlike other species of Opuntia, macrocentra’s yellow flowers will have a reddish throat that remains unopened. Unfortunately, the flowers will only last for a day. Purple Prickly Pear will bloom in the mid-afternoon and close up at night.

Opuntia macrocentra is native to Northwestern Mexico and the lower Southwestern United States. It’s a member of the Cactaceae family.

General Information

Also known as: Purple Prickly Pear, Long-spined Prickly Pear, and Black-spined Prickly Pear.
Plant Family: Cactaceae
Origin: Northwestern Mexico and the lower Southwestern United States
Height: 1.9-feet (60cm) to 3.9-feet (120cm)
Exposure: Up to 6 hours per day; full to partial sunlight. If indoors, you can use a Grow Light.
Water Needs: Drought-tolerant; use the “Soak and Dry” method for watering
Soil Type: Cactus soil or 2 parts potting soil mixed with 1 part perlite, pumice, coarse sand, and lava rock to speed up soil drainage.
Soil pH: 6.0 to 7.0

How to Grow and Care for Opuntia Macrocentra

Opuntia macrocentra’s otherworldly appearance might make you think that only experienced horticulturists can handle it. The truth is, as long you keep things simple, any first-timer won’t have problems growing and caring for Purple Prickly Pear.

There’s more to Black-spined Prickly Pear than just its adorable looks. If you have deers roaming in your area, don’t worry as macrocentra isn’t on their menu. While its flowers have a short lifespan, they do attract hummingbirds.

Like other succulents, Opuntia macrocentra stores water in its leaves and stems that allow it to survive drought periods. However, unlike other succulent plants, Long-spined Prickly Pear also tolerates periods of frost.

If your region experiences temperature drops to 10°F (-12.2° C), the Opuntia macrocentra will be just fine.

Sunlight

Opuntia macrocentra needs to receive full or partial sunlight for up to 6 hours every day. If grown in an outdoor garden, keep Purple Prickly Pear away from the afternoon sun as its intense rays will burn the leaves.

As an indoor plant, place Long-spined Prickly pear near a window that brings in regular sunlight. For example, if you live in the Northern Hemisphere, a room where you have a Southern-facing window would be the ideal location.

Another option you have if sunlight is difficult to provide consistently, is to place macrocentra under a Grow Light.

Sunlight is very important to growing a healthy succulent. Without regular sunlight, etiolation can take place. This is a condition where the plant’s leaves will stretch out as if looking for the sun. The leaves will lose their magnificent shape; thin out and eventually die.

Watering

Sunlight every day – Yes.

Water every day – No.

These 2 rules are what you need to keep in mind to properly grow and care for Opuntia macrocentra.

Giving the soil water while it still has moisture will compromise the health of your succulent because its roots could rot. Likewise, the soil might potentially become a breeding ground for bacteria and fungi.

There’s nothing complicated about watering succulent plants. Simply give the soil a good soaking whenever it has completely dried out. This is called the “Soak and Dry” method.

You can easily check the dryness of the soil by sticking your finger or a stick an inch deep. If the soil or the stick feels dry, then it’s okay to give it water. Don’t water from above because the plant itself will get wet. Only water the soil.

Expect to water the soil every seven to 10 days during the growing seasons of spring and summer. In contrast, you might only water once a month during winter because the soil will retain moisture longer.

Pot and Soil

You can grow Opuntia macrocentra successfully in a pot as long as it supports soil drainage and aeration. The best types of pot to use are those made of either unglazed ceramic or terracotta because these materials are organic and highly absorbent.

When you plant Black-spined Prickly pear in one of these pots, moisture will easily escape from the soil and evaporate along the sides. Choose a pot that’s slightly larger than the base of the plant to give the roots enough room to grow and for air to flow through the soil.

Check the bottom of the pot. It must have a drain hole to let excess water leak out.

Cactus soil is a good choice for Opuntia macrocentra. You can also combine 2 parts of potting soil with 1 part of perlite, pumice, coarse sand, or lava rocks. These materials are quite gritty. They can perforate the soil to improve drainage.

How to Propagate Opuntia Macrocentra

If you want to add more Opuntia macrocentra to your collection of Purple Prickly Pear succulent plants, you can propagate the species by using these 2 methods: Stem cuttings and seeds.

Cuttings Method

Step 1: Choose a healthy stem that’s growing near the main plant.

Step 2: Use a sharpened and sterilized knife to cut a section of the stem.

Step 3: Leave the stem cuttings in a dry area where they can grow hard calluses over a period of 2 to 4 days.

Step 4: Place the calloused stem cuttings on top of cactus soil. Make sure the cuttings have enough distance between them,

Step 5: Lightly water the soil and place the container near a window that gets up to 6 hours of partial sunlight per day.

Step 6: Once the roots have taken hold in the soil switch to the “Soak and Dry” watering method.

Seeds Method

Step 1: Sow the seeds you’ve collected in well-draining soil.

Step 2: Lightly water the soil and place it near a window that gets partial sunlight. The best time to plant seeds is when temperatures are warmer. If the weather gets colder, plant indoors and place the pot under a Grow Light.

Frequently Asked Questions

The post Opuntia macrocentra appeared first on About Succulents.

Opuntia “Pink Frost” is a Prickly Pear Cactus that grows into tall, wide, and large shrubs. In spring, this cold-hardy cactus plant gets adorned with adorable rose-like pink blossoms. It will be perfect for a rustic outdoor garden because you can set it up as a living cactus fence.  

Opuntia Pink Frost grows up to 12-inches  (30.5cm) tall and 6-feet (1.8m) wide. As the plant matures, it spreads out forming a large shrub. This frost-hardy cactus has green fleshy paddle-like stems with tiny and fuzzy spines called glochids.  

This Opuntia species is a hybrid of Opuntia Aurea produced by Tom Jesch. This type of succulent is commonly found in the sub-tropical regions in North America and the dry areas in Mexico. It is part of the Opuntia genus of the Cactaceae family. 

Opuntia Pink Frost can withstand freezing temperatures and intense heat.  It will survive extreme temperatures to as low as -17.7°C (0°F).

General Information

Also known as: Pink Frost
Plant Family: Cactaceae
Origin: Hybrid of Opuntia aurea produced by Tom Jesch; can be found in the sub-tropical regions of North America and in the dry areas of Mexico.
Height: 12-inches (30.5cm)
Exposure: Full Sun
Water Needs: Low; use the “soak and dry” watering method
Soil Type: Cactus soil combined with gravel and coarse sand
Soil pH: 6 to 7.5

How to Grow and Care for Opuntia ‘Pink Frost’

Opuntia Pink Frost is popular with plant lovers because it’s not only a beautiful and durable succulent but it’s also a low-maintenance cactus plant.

Pink Frost will stay healthy for as long as you provide the following growing conditions:

Sunlight

Opuntia Pink Frost grows best in areas exposed to full sun for at least 6 hours a day. When it receives ample sunlight, it will produce sturdy, tall, and wide stacks of stems. It will also bloom every Springtime without fail.

If planted indoors, place the pot near a South-facing window. Turn the pot every week so all sides of the plant will get exposed to sunlight. Make sure to find a sunny area for your pot, otherwise, your plant will suffer from etiolation.

Etiolation is a condition of plants where the stems lose their natural form as it stretches out in search of a better source of light. Lack of sunlight also leads to stunted growth and poor flower production.

Watering

Although Opuntia Pink Frost can store water in their leaves and stems, it still needs to be watered properly to live long and healthy. Overwatering causes root rot while underwatering causes the plant to shrivel.

Use the “Soak and Dry” watering method. Drench the soil until the water comes out of the drainage hole. Wait till the soil dries out completely in between waterings. Do not keep the soil damp for too long to prevent fungal growth.

A hygrometer will help measure the soil’s moisture level but a stick inserted an inch deep will do just fine. If the stick feels dry to the touch, it means Pink Frost needs water.

In the summertime, you might only need to water Pink Frost every seven to 10 days. Again, check the soil’s level of dryness to be sure.

When winter comes, the watering schedule might be every 2 to 4 weeks depending on how soon the soil dries out. Keep in mind that soil tends to retain moisture longer during cold weather.

Pot and Soil

Did Pink Frost come in a plastic container? Discard it right away. It is best to plant your Opuntia Pink Frost in a terracotta or unglazed ceramic pot with a drainage hole because these materials allow excess moisture to evaporate from the soil. These types of pots also support proper soil aeration which is good for the roots.

When it comes to the right size, your pot should be 1” to 2” wider than your cactus plant to give it enough room to grow. It should have a depth of 4” to 7” depending on how long the roots of your cactus are. When you see roots coming out of the drainage hole, it is time to move your cactus to a bigger pot.

For potting soil, use standard cactus mix combined with gritty materials such as perlite, coarse sand, gravel, and pumice.

Fertilize your young ‘Pink Frost’ with a 10-10-10 fertilizer or NPK (Nitrogen-Phosphorus-Potassium) before its growing season begins. Feed your cactus plant once in spring and summer. Lay off the fertilizer when it enters its rest period during the colder seasons.

How to Propagate Opuntia ‘Pink Frost’

Propagating Opuntia ‘Pink Frost’ is not a complicated process. You can multiply your cactus collection by using stem cuttings. The best time to do this is during late spring to early summer when the stems are ready for active growth.

Stem/Pad Cuttings

Step 1: Use a sterile sharp knife or pair of pruning shears to cut off a stem/pad at the joint connecting it to another pad.

Step 2: Leave your pad cutting in a dry and well-ventilated area for 2 to 3 days or until the cut ends calluses or seals.

Step 3: Get a terracotta pot with a drainage hole. Fill it with cactus soil combined with perlite and gravel. Gently insert the pad cutting (calloused end first) into the soil.

Step 4: Place the pot in a warm area, away from direct sunlight. Mist the soil three times a day. After three weeks, your Opuntia ‘Pink Frost’ should start rooting.

Frequently Asked Questions

The post Opuntia “Pink Frost” appeared first on About Succulents.

Cereus forbesii monstrose is also known as ‘Ming Thing’ and is a treelike cactus with blue-green columnar stems.  The club-like stems have woolly brown areoles with short brown spines on top. Its unique appearance makes it a fascinating conversation piece in any garden.  

Ming Thing thrives well in pots but it can also be grown in an outdoor rock garden.  This eye-catching cactus forms clusters and grows up to 12-inches (30.5 cm) tall and 6-inches (15 cm) wide if planted in a pot. If planted outdoors, it grows up to 6 feet (2m).

When Cereus forbesii monstrose reaches maturity it produces large white and pale pink funnel-shaped flowers with hints of burgundy in early Spring. These lovely flowers bloom at night.

Cereus forbesii monstrose is native to Bolivia and Argentina. It is part of the Cereus genus from the Cactaceae family. 

General Information

Also known as: Ming Thing
Plant Family: Cactaceae
Origin: Argentina and Bolivia
Height: 12-inches (30.5 cm)
Exposure: Partial to full sunlight but to help Ming Thing attain its maximum colors, full sunlight for up to 6 hours per day is recommended
Water Needs: Drought-tolerant; use the “Soak and Dry” watering method where you give the soil a thorough soaking only when it’s 100% dry.
Soil Type: Cactus or succulent soil mix combined with loam soil and gritty materials such as sand, perlite, gravel, and pumice
Soil pH: 6.0

How to Grow and Care for Cereus Forbesii Monstrose

Cereus forbesii monstrose is easy to grow and care for. Many succulent growers prefer to grow this plant in dish gardens because it makes a great conversation piece.

Ming Thing is not cold-hardy and cannot tolerate temperatures lower than -1.1°C (30°F).

Sunlight

Cereus forbesii monstrose grows happily when exposed to full sunlight for at least 6 hours every day. Place it near a sunny window if it’s potted indoors. If possible, take the pot outdoors during spring and summer where it can happily bask under the sun.

The potted cactus is vulnerable to etiolation, where the stems stretch out in search of a light source.

During winter, place the pot near a south-facing window. If your house is low in natural light it is best to get a grow light, so your Ming Thing will remain healthy and happy during the frosty season.

Watering

Use the “Soak and Dry” method to water your Cereus forbesii monstrose. Drench the soil with water and let it dry out completely before you water it again. This will ensure that the roots of your plant will not rot from standing in waterlogged soil.

To test the soil for dryness, insert a stick an inch deep. Pull out the stick and if its end is dry, prepare the water and give the soil a thorough soaking.

Ming Thing actively grows during Summer and Spring. Water your plant once every 7 to 10 days and only when the soil is dry.

During winter, when it enters its dormant phase, water your plant once a month and only when the soil is bone dry.

Pot and Soil

Use a terracotta or ceramic pot for your Cereus Forbesii Monstrose. This type of container is made with porous materials that allow proper soil aeration and moisture evaporation.

When it comes to pot size, get one that is 10% larger than the diameter of your plant. The roots of Ming Thing are not too long, so get a pot that is 4 to 7-inches (10.16 to 17.78 cm) deep to give ample space for root growth.

Ming Thing originates from arid lands, so it grows best in fast-draining soil. Use cactus or succulent soil mix combined with perlite, sand, or pumice.

Fertilize your cactus only when it is actively growing during Summer and Spring. Use a balanced, water-soluble, 10-10-10 fertilizer, and diluted to ¼ strength. Feed your plant 2 to three times during the growing season. Do not fertilize during winter.

How to Propagate Cereus Forbesii Monstrose

Ming Thing can be propagated from stem cuttings. The best time for propagation is during early spring to late summer.

Stem Cuttings

Step 1: Use a sterile sharp knife or pair of pruning shears to cut a stem from the mother plant.

Step 2: Leave the stem cutting in a warm and shaded area for 3 to 4 days or until the cut wound seals or calluses.

Step 3: Fill a terracotta pot with a drainage hole with cactus or succulent soil combined with perlite or pumice. Plant the calloused stem cutting (cut end first) into the soil. You can use wooden sticks to help the stem cutting stand upright.

Step 4: Place the pot in a partially shaded area. Mist the soil every day for two to three weeks or until new roots emerge. Use the ‘soak and dry’ watering method once the plant starts rooting.

Frequently Asked Questions

The post Cereus Forbesii Monstrose “Ming Thing” appeared first on About Succulents.

Epithelantha micromeris will elicit comments such as “odd”, “strange”, and “weird” but in a nice way. Affectionately called, “Button Cactus”, this cute and charming succulent can grace your rock garden or liven up your living room. 

Button Cactus starts out as a small shrub but grows up to a height of 12-inches (30.5cm) and spreads out to 36-inches (91cm) in diameter.  

This cactus has a dark green color and is covered by many tiny, grayish-white radial spikes. In fact, the surface is riddled with hundreds of spikes that you can only see a portion of the succulent’s body. 

In the late winter to early spring, Epithelantha micromeris will bloom small, pinkish-white flowers that are reportedly the smallest among Cacti. The flowers bear bright-red, cylindrical fruits with black seeds. The fruits are edible. 

Epithelania micromeris is part of the Cactaceae family and is native to Madagascar. Its other nickname is Pingpong Ball Cactus.

General Information

Also known as: Button Cactus. Pinpong Ball Cactus
Plant Family: Cactaceae
Origin: Madagascar
Height: 12-inches (30.5cm)
Exposure: Full to partial sun for up to 8 hours per day
Water Needs: Drought-tolerant; use the “Soak and Dry” method where the soil is given a thorough drenching only after it has been tested to be 100% stone dry
Soil Type: Cactus or a succulent soil mix with added gritty ingredients such as coarse sand for improved drainage
Soil pH: 5.8

How to Grow and Care for Epithelantha Micromeris

Epithelantha micromeris can be arranged as potted succulents or in hanging baskets to brighten your outdoor garden or patio. 

They are small cacti and will stand out when placed on shelves in your office, kitchen, and dining room. You might have come across Button Cactus in the powder rooms of hotels or as table accents at a wedding. 

Aside from causing your guests to say “awwww…”, another reason why Pingpong Ball Cactus is popular is that it’s easy to grow and care for. 

Sunlight

Similar to other species of succulents that thrive when given enough sunlight, Epithelantha micromeris enjoys more sun than everyone else. 

Succulents generally do well when given up to 6 hours of partial to full sun exposure. But Pingpong Ball Cactus grows better when given up to 8 hours of sun and direct exposure at that. 

As an outdoor succulent, plant Epithelantha micromeris in a location in the garden that gets up to 8 hours of sunlight. You can grow Button Cactus in a container and let it have 4 to 6 hours of direct sunlight before moving it to partial shade. 

Planting Button Cactus in a pot will be recommended if temperatures in your area fall below 20° F (-6.7° C) because this isn’t a cold-hardy succulent. 

When the frosty months come in, move Pingpong Ball Cactus indoors for safety. Make sure the cactus still gets its daily dose of the sun’s rays by positioning it near a window that gets at least 4 hours of partial sunlight. 

To be sure, Epithelantha micromeris is happy indoors, place it under a Grow Light for 6 to 8 hours every day.                                                                                                         

Watering

Cacti are known to survive drought conditions where they don’t get any water for weeks. Epilantha micromeris prefers fewer watering schedules to keep its roots safe from rotting.

Thus, if you left for a 2-week vacation and forgot to water Button Cactus, don’t sweat it. Your succulent will be healthy and well when you get back. 

Don’t water the soil until you’ve tested its level of dryness. The rule is the soil must be 100% dry before giving it water. You can easily do this by inserting a finger or a stick into the soil. 

Pull it out and check the end of the stick. If you’re convinced that the stick is dry, go ahead and give the soil a good soaking. Always water the soil and never the plant.

Expect to water the soil more frequently – around every seven to 10 days – in the summertime. When winter rolls in, you won’t water as much – maybe once a month – because soil retains moisture longer.

Pot and Soil

Drainage remains your top priority when shopping for Button Cactus’s pot and soil. Unglazed ceramic and terracotta pots are your best options because these materials support soil aeration and make it easier for moisture to escape. 

The pot should be 10% to 20% larger than the base of the succulent to prevent the roots from getting tangled up and to allow air to flow through properly. Similarly, getting a pot that’s too big for Button Cactus will be harmful because more soil means it might take longer to dry out. 

For soil, choose a fast-draining variety such as a cactus mix. Add gritty materials such as coarse sand, perlite, and pumice to further improve drainage. 

How to Propagate Epithelantha Micromeris

Sure, you can always head off to the nearest nursery to buy another succulent. But where’s the fun in that? Propagating Epithelantha micromeris is a fun learning experience that you can share with your kids. 

There are 2 methods to choose from – Offsets and seeds. Propagating from either method can result in success but seeds might be a bit more tricky because these are sensitive to changes in temperature.

Offsets Method

Step 1: You can gently pull out the offsets that are growing near the base of Button Cactus or use a sterilized and sharpened knife to cut off obstructions to a clean pull. 

Step 2: Allow the offsets 2 to 4 days to dry out and develop calluses. 

Step 3: Plant the offsets on a bed of well-draining soil. Lightly water the soil and place it near a window that gets partial sunlight. 

Step 4: Check the soil from time to time. Once the roots have formed, only water the soil when it’s 100% dry.

Seeds Method

Step 1: You can harvest the seeds that are produced by the fruits of Epithelania micromeris. Planting the seeds outdoors is possible if you live in a region where the temperature averages 20° F to 25° F (-6.7° C to -3.8° C ) or under USDA zone 9A. If the temperatures get colder, it would be best to propagate via seed indoors.

Step 2: Plant the seeds in well-draining soil. Water the soil lightly and cover it with plastic. Place the pot near an area that receives partial sunlight. It might take a few days for germination to take place.
Step 3: Remove the plastic once the roots have taken hold and water the soil only when it’s completely dry.

Frequently Asked Questions

The post Epithelantha micromeris appeared first on About Succulents.

Opuntia “Orange Chiffon” is a low-growing cactus that looks enchanting when in full bloom. In spring, it explodes in clumps of large, sweet orange flowers.  

The Opuntia Orange Chiffon has thornless, fleshy, oval, green pads that turn light purple in winter.  

This prickly pear cactus variant matures into wide and large shrubs forming a natural fence for an outdoor garden. It grows up to 2-feet (0.60m) and 4-feet (1.22m) wide.  

Opuntia Orange Chiffon is native to South America. It is part of the Opuntia genus from the Cactaceae family.

General Information

Also known as: Orange Chiffon
Plant Family: Cactaceae
Origin: Partial to Full Sun
Height: 2-feet (0.60m)
Exposure: Partial to Full Sun; we recommend full sun for the plant to attain maximum colors
Water Needs: Drought tolerant; use the “soak and dry” watering method
Soil Type: Cactus mix or commercially-available succulent soil combined with gritty materials such as sand, perlite, and crushed limestone
Soil pH: 6 to 7.5

How to Grow and Care for Opuntia Orange Chiffon

Opuntia Orange Chiffon is an easy-to-care-for cactus.  Although it is best to grow them outdoors to form natural garden barriers, it is possible to grow them indoors in potted containers.  

Orange Chiffon is a frost-hardy cactus that can tolerate temperatures as low as -28.8 °C (-20°F).

Sunlight

As an outdoor succulent, plant your Orange Chiffon prickly pears in an area where it can get at least 6 hours of partial to direct sunlight every day.  If potted indoors, place it near a South or West-facing window where it can get plenty of filtered light.

Orange Chiffon prickly pears thrive best when exposed to a lot of bright light.  When your cactus plant is deprived of sunlight it will suffer from etiolation.  This is a condition where the plant loses its natural shape as it stretches out to seek sunlight.  

The Orange Chiffon also needs sufficient light exposure for it to bloom well.  When your plant starts to lose its vibrant color and shape, move your pot to an area where it can get more sunlight.  

Watering 

Opuntia Orange Chiffon can survive without water for days.  The roots of cacti are prone to root rot so make sure that you water your plant sparingly.  

If you live in an area with a rainy season, it is best to grow your cacti in pots.  This way, you can move them indoors to protect your plants from heavy rains and damp soil. 

Use the ‘soak and dry’ watering technique.  Drench the soil with water and then allow it to fully dry out before watering again.  Test the soil’s dryness by inserting a stick into the soil. If it comes out dry, water the soil deeply.  

During summer, water your Opuntia Orange Chiffon once every seven to 10 days.  When the weather starts to become colder, increase your watering intervals because cold temperatures maintain wet conditions longer. Water your plant only when the soil is bone dry during winter.

Pot and Soil

Choosing the right pot for your cactus plant is essential to its survival. The size, shape, and material of your pot will affect the growth and health of your plant.

Cactus plants grow well in terracotta or unglazed ceramic pots because these are made with porous materials that allow good soil aeration.  When it comes to size, get one that is 1 to 2 inches (2.54 to 5.08cm) wider than the diameter of your Opuntia Orange Chiffon.   

The depth of your pot depends on the length of your plant’s roots.  Start with a pot that is 4 to 7 inches (10.16 to 17.78cm) deep.  You have to make sure that the roots will have enough space to grow.  

Make sure that the pot has a drain hole at the bottom to filter out excess water. If it’s not included, cover the drain hole with a mesh net to keep soil from falling out. 

For potting soil, drainage remains the top priority. Use well–draining soil such as cactus mix or a commercially-available succulent brand and combine with gritty materials such as coarse sand, gravel, and perlite. 

You do not need to fertilize the soil if your Orange Chiffon is planted outdoors. However, as an indoor succulent, Orange Chiffon won’t be getting the same levels of soil nutrition and fertilization becomes important. 

Feed your plant with a low-nitrogen water-soluble fertilizer because the nutrients in container soil get depleted faster.  Use a 5-10-10 or 10-10-10 NPK blend (Nitrogen-Potassium-Phosphorus) diluted with water to ¼ strength.  

The best time to fertilize the soil is during the growing season which is summer. Lay off the fertilizer during winter when it enters its dormant phase.

How to Propagate Opuntia “Orange Chiffon”

Accentuate the beauty of Opuntia Orange Chiffon by adding more of these charming succulents to your garden. You can multiply your collection of Opuntia ‘Orange Chiffon’ by using stem/pad cuttings.  

Stem/Pad Cuttings Method

Step 1:  Gently pull one pad from the main plant.  Try to separate it as cleanly as you can.  You can also use a sterile sharp knife or a pair of pruning shears to cut a stem/pad.

Step 2:  Leave the stem cutting in a partially shaded area for 5 days or until the cut end calluses over.  

Step 3:   Fill a terracotta pot with cactus soil with gritty materials.  Insert the stem cutting (calloused end) into the soil.  
Step 4:  Place the pot in a brightly lit or partially shaded area.  Mist the soil when the top 2 inches get dry.  After a few weeks, your Opuntia ‘Orange Chiffon’ will begin to root.

Frequently Asked Questions

The post Opuntia “Orange Chiffon” appeared first on About Succulents.

Opuntia Engelmannii var Lindheimeri also known as Texas Prickly Pear is a distinct-looking cactus with flat pear-shaped pads which are segmented evergreen stems.  

The pads, also known as nopales, are 8 to 12-inches (20.32 to 30.48cm) long and are covered with long sharp spines which are actually leaves that hardened over time.  

The fleshy green pads are edible only after all the spines and tufts are removed.  This towering cactus bears deep red or purple, juicy,  sweet seasonal fruits called pears or tunas.  These edible fruits turn ripe for picking during midsummer.  

The Texas Prickly Pear grows up to 8-feet (2.4m) wide and 5-feet (1.5m) tall.  It blooms orange or yellow flowers in April through June. The flowers are good-sized at 2 to 4-inches (5.08 to 10.16cm).  

Opuntia Engelmannii var Lindheimeri is grown best outdoors because of its prickly spines and height.  It can also be grown indoors, in a conservatory, or a heated greenhouse.  

The Prickly Pear cactus is native to Arizona, California, New Mexico, Nevada, New Mexico, Oklahoma, and Texas, USA.  It is part of the Opuntia genus from the Cactaceae family.

General Information

Also known as: Texas Prickly Pear and Lindheimer Prickly Pear
Plant Family: Cactaceae
Origin: Arizona, California, New Mexico, Nevada, New Mexico, Oklahoma, and Texas, USA
Height: 3-6 ft
Exposure: Full sun or partial shade; avoid the afternoon sun
Water Needs: Drought-tolerant; water the soil only when it’s completely dry
Soil Type: Cactus mix combined with gritty materials such as perlite, pumice, coarse sand, or lava rock
Soil pH: 6 to 7.5

How to Grow and Care for Opuntia Engelmannii var Lindheimeri

The robust-looking Opuntia Engelmannii var Lindheimeri can be easily grown outdoors where it can bask under the sun.  It can also be grown indoors in potted containers away from children and pets.

The Texas Prickly Pear is not a cold-hardy cactus.  It cannot survive temperatures below -12° C (10° F).  If you live in an area with extremely cold weather,  it’s best to plant your Prickly Pear cactus in a container so you could move it indoors during winter.  

Sunlight

Plant your Opuntia Engelmannii var Lindheimeri in an area where it could get at least 6 hours of full or filtered sun every day.  If potted indoors, place it near a south- or west-facing window.

When a cactus plant does not get enough light, its stems will curl up as if stretching out to find the light.   Make sure that your cactus plant is located in an area where it gets enough dose of sunlight to prevent etiolation.  Otherwise, the pads will become pale, thin, and tubular.  

Watering

The Texas Prickly Pear is drought-tolerant and can survive without water for days.  Overfeeding it with water can cause root rot that will lead to its early demise.

Use the ‘soak and dry’ watering method to prevent bacteria and molds from breeding in the soil.   This method involves drenching the soil with water and waiting for the soil to fully dry out before watering again.  To test the soil’s dryness, insert a stick into the soil or use a moisture sensor.

Watering your cacti and succulents properly will make them happy and healthy.  Make sure to check your plant regularly so you will be well aware of its condition and develop a good sense of its needs.  If you are a new succulent grower, it is best to write down your watering schedule.

Water your potted Texas Prickly Pears less during summer and keep the soil moist during winter.

Pot and Soil

Opuntia engelmannii var lindheimeri will grow best in terracotta or unglazed ceramic pots. They are made with porous materials that allow proper soil aeration and prevent moisture retention.  

When buying a pot for your cactus, choose one that is 10% wider in diameter than the plant.  For example, if your Prickly Pear is 4 inches in diameter, get a pot that is 5 inches wide.

Cacti do not like damp soil so make sure to get pots with drainage holes. The Texas Prickly Pear grows best in a cactus soil mix or free-draining compost. To improve the quality of drainage, add water filtering materials such as perlite, pumice, lava rocks, or coarse sand.

Opuntia engelmannii var lindheimeri requires no fertilizer if it is planted outdoors.  If potted, it will require feeding from spring to fall because the soil’s nutrients get depleted faster.  

Feed a baby cactus with a balanced fertilizer, one that has a balanced ratio of nitrogen, phosphorus, and potassium.  For grown plants, use a 0-15-0 no-nitrogen fertilizer to have more flowers and fruits.  If you want your plant to bear more pads, use a nitrogen-rich fertilizer. 

How To Propagate Opuntia Engelmannii var Lindheimeri 

Opuntia Engelmannii var Lindheimeri can be propagated by using its pads/stems or seeds.  The best time to propagate by stem/pad cuttings is during spring or early summer while seeds are best planted in late spring.

Stem/Pad Cuttings Method

Step 1:  Wear thick gloves and long sleeves to protect your hands and arms from the sharp spines and skin-irritating glochids.  

Step 2:  Gently pull the pads from the main plant or use a sterile knife or shears to cut them off.  Always use a sterile and sharp cutting tool to prevent infection of the cut area.

Step 3: Place all the pads in a dry and shaded area.  Leave them there for a few days or until the wounds heal or callus.

Step 4: Fill terracotta pots with cactus soil combined with gritty materials.  Choose pots that are wider than your pads.  Insert each pad (calloused side down) into the soil.  

Step 5:  Place the pots in an area exposed to filtered bright light.  Do not water your Prickly Pears until they show signs of growth.   

Seeds

Step 1:  Fill a seed tray with cactus soil.  Soak the soil and drain it.  

Step 2:  Gently rub the seeds on sandpaper to remove the seed coat and help speed up germination.  Sow the seeds in the seed tray and make sure there’s a 1-inch space in between the seeds.  If you are using small pots, plant one seed in each pot.

Step 3:  Press the seeds into the soil and cover them with a thin layer of soil.  Lightly mist the soil and cover the containers with a plastic cover.  Punch small holes on the cover to allow air to circulate.  
Step 4:  Put the seed tray or pots in a sunny area.  Mist the soil until seedlings appear.

Frequently Asked Questions

The post Opuntia Engelmannii var Lindheimeri appeared first on About Succulents.

Myrtillocactus geometrizans forma cristata is a fascinating succulent that has an unusual charm about it. This cactus is identified by its robust, waxy-textured branches that fan out over an upright but stocky trunk. As the branches spread, they form wavy structures that give the illusion of sculpted, blue-green plumes. 

Because it’s difficult to state its name to a nursery, you can refer to the succulent plant’s common names which are Dinosaur Back Plant, Crested Blue Flame, Crested Blue Candle, and Crested Blue Myrtle. It’s part of the Cactaceae family and is native to Central and Northern Mexico. 

Dinosaur Back Plant can grow as tall as 13-feet (4m) while its stems can reach a height of 9-feet (3m) with a diameter of 3-feet (8cm). While categorized as a cactus, Myrtillocactus geometrizans has small spines that are few in number. 

If properly cared for, this alluring succulent will bloom small, exquisite cream-colored flowers that measure 1.45 inches (3.7cm) in the summertime. As a special reward, Dinosaur Back Plant will also bear small fruits that are very sweet and have a similar appearance to a plum. These fruits are popularly sold in Mexico. 

General Information

Also known as: Dinosaur Back Plant, Crested Blue Flame, Crested Blue Candle, and Crested Blue Myrtle.
Plant Family: Cactaceae
Origin: Central and Northern Mexico
Height: 9-feet (3m)
Exposure: Partial to full sunlight but preferably full sunlight.
Water Needs: Sparingly; only water the soil when it’s 100% dry.
Soil Type: Commercial soil mix or sandy soil with added perlite, pumice or lava rocks for better drainage.
Soil pH: 5 to 6.5

How To Grow And Care For Myrtillocactus Geometrizans Forma Cristata

Myrtillocactus geometrizans forma cristata’s beguiling appearance makes it a favorite of horticulturists looking to spruce up their succulent garden.

If you’re in the market for a succulent plant that’s easy to grow and care for, put Dinosaur Back Plant on the top of your list. As a cactus, it’s highly durable to changes in weather conditions and can survive long periods of time without water.

Follow our simple tips below to get the most of Myrtillocactus geometrizans forma cristata.

Sunlight

Crested Blue Myrtle prefers getting a daily dose of the sun’s full rays. This is especially true for plants that exceed 3.9-feet (120cm). Thus, it’s better to grow Crested Blue Myrtle in an outdoor garden where it can be exposed directly to the morning sun for 4 to 6 hours every day.

If your region experiences winter or frosty temperatures where the mercury can drop below 30° F (-1.1° C), it’s recommended to plant Myrtillocactus geometrizans in a pot that can be transferred indoors. Just be sure to situate the cactus near a window where it can get partial to full sunlight for 4 to 6 hours each day.

Watering

Like other succulent plants, Myrtillocactus geometrizans thrives better with few watering schedules. Myrtillocactus geometrizans stores water in its stems and can survive extended periods of drought better than other species.

In fact, watering the soil too frequently will immerse the roots longer in a moist environment and cause its cells to rupture which will lead to disease.

The best way to approach watering is to first test the soil’s level of dryness. An effective way is to insert a dry stick at least an inch deep into the soil. If the stick comes out dry, then it’s time to water the soil.

Always water the soil and never the plant itself. Give the soil a thorough soaking. If Dinosaur Back Plant is planted in a pot, you can stop once excess water leaks out of the drain hole.

Ideally, Myrtillocactus geometrizans is watered every seven to 10 days but to be sure, check the soil’s dryness first.

Pot and Soil

A pot that’s made of ceramic material or terracotta is best for Myrtillocactus geometrizans. These types of materials allow excess moisture to escape from the soil and dry it out faster.

Choose a pot that’s approximately 1.5 times the size of the plant to allow its roots more room to grow. Also, make sure the bottom of the pot has a drain hole with a mesh net cover to allow excess water to filter through.

Plant Crested Blue Myrtle in a variety of soil that’s well-draining. A commercial soil mix is good and sandy soil will work just fine. To improve drainage, add pumice, lava rocks, and perlite.

If you plant Crested Blue Myrtle in a pot, it might not get enough nutrients compared to one that’s planted in an outdoor garden.

To be sure that your cactus stays healthy, fertilize the soil every 40 days. Follow the instructions on the label on how much water to use in order to properly dilute the fertilizer.

How To Propagate Myrtillocactus Geometrizans Forma Cristata

If you’re happy with Myrtillocactus geometrizans and want to increase its number, the good news is that the species can be propagated from stem cuttings.

Step 1: Choose a healthy stem.

Step 2: Cut off the stem from the main plant by using a sharpened and sterilized knife or garden shears. It’s very important to perform a clean cut to ensure successful propagation.

Step 3: Place the stem cuttings in a dry area and allow it to grow hardened calluses over a few days.

Step 4: Once the calluses have formed, place the stem cuttings on top of sandy soil.

Step 5: Lightly water the soil and place the pot near an area that receives 4 to 6 hours of direct sunlight every day.

After a few days, the roots will form and take hold in the soil. From here, water the soil only when it’s completely dry.

Frequently Asked Questions

The post Myrtillocactus geometrizans forma cristata appeared first on About Succulents.

Rhipsalis Ewaldiana, also known as Mistletoe Cactus, is a spineless epiphytic (tree-dwelling) cactus with unique-looking trailing foliage. that strikingly resembles green waterfalls. In its natural habitat, this plant can be found clinging to tree crotches or branches.

Mistletoe Cactus has pencil-thin, deep green, triangular, branching stems that can reach the length of 61cm (24”) and width of 30.5cm(12”). The stems are donned with barely visible pale brown thorn-like bumps.

During Spring and Fall, the Mistletoe Cactus blooms small white flowers. Rhipsalis Ewaldiana is native to Brazil. It is part of the Rhipsalis genus from the Cactaceae family.

General Information

Also known as: Mistletoe Cactus
Plant Family: Cactaceae
Origin: Brazil
Height: 61cm (24”)
Exposure: Full or partial sun; up to 6 hours.
Water needs: Not drought-resistant; water the soil when it is surface dry
Soil type: Cacti mix combined with mineral grit such as coarse sand, perlite, and pumice.
Soil pH: 5.0 to 6.5

How to Grow and Care for Rhipsalis Ewaldiana

Growing and caring for Rhipsalis ewaldiana is very easy. Once you learn how to mimic the living conditions of its natural habitat, your plant will thrive well with little attention.

Many succulent growers use the Mistletoe Cactus as indoor hanging plants because of its beautiful long trailing stems. It can also be mounted on a piece of bark similar to growing orchids.

Rhipsalis ewaldiana is not cold-hardy and will not survive at temperatures below -1.1°C (30°F).

Sunlight

In its native habitat, Rhipsalis ewaldiana is used to receiving bright light filtered by the dense tree branches. Keep in mind that replicating its native living conditions is the key to your plant’s good health.

If grown outdoors, make sure to place it in a location where it will get plenty of morning sun and full shade in the afternoon for 5 to 6 hours a day. Exposure to direct sunlight will burn the stems while insufficient lighting will stunt its growth.

If grown indoors, place your pots near north or west-facing windows. If your windows at home receive midday or afternoon sun, place your pots 50cm (20”) away to prevent sunburn.

Watering

Rhipsalis ewaldiana is not a drought-resistant succulent. You need to water your plant regularly but avoid over-soaking the soil to prevent root rot and weakening of the stems. It is best to use soft water or rainwater because this plant is sensitive to lime.

Make sure that the soil is surface dry or 2” deep dry before you water again. Water frequently in summer and spring when it is actively growing. Taper off watering during winter, when Rhipsalis ewaldiana is in its dormant phase.

Mistletoe Cactus thrives well in humid climates because its natural habitat is the rainforest. Many Rhipsalis indoor growers use humidifiers during winter when the humidity level is at its lowest.

Pot and Soil

The best kind of pot to use for Rhipsalis ewaldiana is made with terracotta or ceramic. This will allow proper soil aeration and prevent water retention. Make sure to get pots with drainage holes to prevent root rot.

The ideal soil mix for your Mistletoe Cactus is cactus potting soil combined with mineral grit such as coarse sand, perlite, or pumice.

Since this plant is epiphytic, it does not require plenty of soil. It only needs to be buried deep enough to allow the shallow roots to get steadily anchored.

Rhipsalis ewaldiana will benefit from regular feeding of diluted fertilizer. Feed your plant every two weeks during summer and spring when it is actively growing. Suspend feeding during its dormant phase in winter.

How to Propagate Rhipsalis Ewaldiana

Rhipsalis ewaldiana can be propagated using its stem cuttings. Keep in mind that the best time to propagate using cuttings is during spring and summer.

Method 1 – Stem Cuttings

Step 1: Use a sterilized sharp knife or pruning shears to separate healthy 8cm – 15cm (3.14” – 5.90”) long shoots.

Step 2: Leave the cuttings in a partially shaded and dry area for 3 to 5 days to allow the wounds to seal and for the calluses to develop.

Step 3: After the cuttings have calloused over, plant them in terracotta or ceramic pots filled with cactus mix and mineral grit.

Step 4: Place the pots in a partially shaded area. Keep the soil slightly moist. You can also cover the pots with transparent plastic bags to increase humidity.

Step 5: Ventilate every day to prevent mold growth. Once the roots have been established remove the plastic cover.

Frequently Asked Questions

The post Rhipsalis Ewaldiana appeared first on About Succulents.

Pachyveria glauca, also known as ‘Little Jewel’ is a hybrid succulent plant that forms compact spiky rosettes of thick, tapered, cylindrical leaves.

The beautiful hues and shape of Pachyveria Glauca give it a striking resemblance to crystal clusters.

The leaves with red-violet tips can have a dusky green-gray or powdery blue-gray hue, depending on the season and light exposure. The leaves are coated with farina, a protective layer that prevents plant dehydration.

The ‘Little Jewel’ reaches a height of 10cm-15cm(4”-6”) and a width of 15cm (6”) upon maturity.

In winter, Pachyveria Glauca produces arched racemes of flowers with melon-colored interior and pink-tinted exterior.

Pachyveria Glauca is a hybrid of Pachyphytum and Echeveria. It is a part of the Pachyveria genus from the Crassulaceae family.

General Information:

Also known as: Little Jewel
Plant Family: Crassulaceae
Origin: Pachyveria Glauca is a hybrid of Pachyphytum and Echeveria which are both native to Mexico.
Height: 10cm – 15cm (4”- 6”)
Exposure: Full to Partial Sun
Water Needs: Drought-resistant; use the ‘Soak and Dry’ watering method
Soil Type: Cactus or Succulent potting mix with mineral grit such as thick sand and fine gravel in a 3:1:1 ratio
Soil pH: 5 to 7

How to Grow Pachyveria Glauca ‘Little Jewel’

Pachyveria Glauca is very easy to grow and care for. This adorable succulent will complement your dish gardens or rock gardens well.

This is not a cold-hardy plant and will die at temperatures below -6.7°C (20°F). Pachyveria Glauca can grow well indoors or outdoors at temperatures between 20°C -35°C (68°F-95°F).

Sunlight

Pachyveria Glauca loves to bask in natural light. If you will plant it in an outdoor garden, choose a location where it can get 5 to 6 hours of indirect morning and late afternoon sun.

Keep it away from direct mid-day sun to prevent sunburn. Indoors, place your container in a south-facing location where it will get plenty of natural light. A sunny window sill is also a perfect area for growing your ‘Little Jewel’.

If you do not have an area inside your house that gets plenty of natural light, get a grow light for your Pachyveria Glauca. Insufficient light will result in etiolation where the leaves stretch out to seek a light source.

Watering

Pachyveria Glauca does not need plenty of water. When it comes to succulents, the preferred watering method is the ‘soak and dry’.

When you water, give the soil a good soak. Allow it to dry out completely before your water again. Before watering, insert a stick into the soil and if it comes out dry you can proceed.

If you allow your Pachyveria Glauca to sit in waterlogged soil for too long, your adorable plant will get sick due to root rot. Make sure to water the soil only and avoid showering or spraying the leaves to prevent leaf rot.

Pachyveria Glauca actively grows during spring and fall so you need to water it every 5-6 days. The watering schedule will be less frequent during summer when it enters its dormant phase.

Pot and Soil

Use a terracotta or ceramic pot for your Pachyveria Glauca to ensure proper soil aeration and moisture evaporation. Get a pot with a drainage hole to prevent water retention.

Plant your ‘Little Jewel’ in a well-draining soil mix. Combine cactus or succulent potting soil with mineral grit such as thick sand and fine gravel in a 3:1:1 ratio.

The soil does not require fertilizer. However, you can feed your plant with a slow-release liquid fertilizer in winter, when it is actively growing.

How to Propagate Pachyveria Glauca ‘Little Jewel’

You can add more ‘Little Jewels’ to your succulents collection by using Leaf Cuttings and Stem Cuttings to propagate.

Method 1 – Leaf Cuttings

Step 1: Choose young and healthy leaves and cut them from the stem using a sterile sharp knife or pruning shears.

Step 2: Place the leaves in a warm area for a few days to allow the cut wounds to seal.

Step 3: When the wounds have been calloused, place the leaves on top of a slightly damp succulent mix.

Step 4: Mist your leaves every 2-3 days until little pups appear.

Step 5: Plant the little shoots in terracotta or ceramic pot filled with succulent or cactus mix combined with grit.

Method 2 – Stem Cuttings

Step 1: Use a sterile sharp knife or shears to cut healthy stems from the mother plant.

Step 2: Leave the stem cuttings in a warm area for a few days and wait for them to be calloused.

Step 3: Plant the calloused stem cuttings in terracotta or ceramic pots filled with cactus or succulent potting mix combined with plenty of gritty materials.

Step 4: Place the pots in a partially shaded area where they can get plenty of natural light. Mist the soil 4 to 5 times a day.

Frequently Asked Questions

The post Pachyveria Glauca ‘Little Jewel’ appeared first on About Succulents.